Connect Electric Australia Blog - Bringing The Power To You
  • Home
  • Blog
  • About Us
  • Services
  • Locations
  • Testimonials
  • Contact Us
Home
Blog
About Us
Services
Locations
Testimonials
Contact Us
Connect Electric Australia Blog - Bringing The Power To You
  • Home
  • Blog
  • About Us
  • Services
  • Locations
  • Testimonials
  • Contact Us
General Information

7 Camping Electrical Safety Tips That Every Traveller Needs to Know

May 3, 2020 by Robbie No Comments
Two Setup Tents

If you plan to spend a weekend or two outdoors this year, then you need to know how to stay safe. The whole family should understand the potential dangers and how to avoid them while exploring Mother Nature. Connect Electric wants to share 10 tips that will keep you safe while using electricity on your next camping holiday.

  • Bring a Fire Extinguisher

It is always best to be prepared when you go camping. Fire extinguishers are for more than just campfires. They are also a must-have when using electricity. A fire in your caravan or tent is dangerous. Having this tool on hand can help you contain the problem and protect others from injury or property damage.

Remember to follow the manufacturer’s recommendations for fire extinguisher testing and replacement. Since you most likely won’t need it often, it is easy to overlook the maintenance of this safety tool.

  • Replace Old or Broken Electronics

Make sure that all electronic devices and appliances you use while camping are in good working condition. Many people take the same items year after year. They can become worn out or damaged while travelling. If anything isn’t working correctly or has visible damage, replace it. Your safety is worth investing in reliable equipment.

  • Use the Proper Cord to Plug In

Use the proper type of cord to plug in when you arrive at your campsite. It should be insulated and designed for this specific purpose. Using a lower quality extension cord or power strip can create a shock hazard.

  • Know the Supply to Avoid Tripping Out

Most campsites have a limited electricity supply available. 230V is common at commercial and Club locations. This is usually enough to power most appliances like the ones you use at home. However, know the restrictions so you don’t end up tripping out the system.

When this happens, the site manager will likely need to be contacted to reset the system. You will also cause problems for other campers who are also plugged into the electrical supply. Don’t become an unpopular camper and be mindful of your energy consumption while camping.

  • Avoid Moisture on Ground

Moisture is everywhere in nature. It can create a risky situation when using electricity in a tent. Make sure all electronics and cords are positioned above the ground in a safe spot. This is especially important for connection points.

  • Switch Power Off When You Leave

Switch the power off when you leave your campsite. It’s courteous and safer for the next travellers who set up camp there. Depending on what you are using, it may also be a good idea to switch off if you plan to be away from camp for the day.

  • Attach the Clip to Tent Frames

Setting up electricity in a tent is a little different from doing the same in a caravan. Most mobile mains will include a clip that can be attached to your tent frame. Make sure you use this to keep the power supply of the ground and secure.

If you plan to spend a weekend or two outdoors this year, then you need to know how to stay safe. The whole family should understand the potential dangers and how to avoid them while exploring Mother Nature. Connect Electric wants to share 10 tips that will keep you safe while using electricity on your next camping holiday.

  • Bring a Fire Extinguisher

It is always best to be prepared when you go camping. Fire extinguishers are for more than just campfires. They are also a must-have when using electricity. A fire in your caravan or tent is dangerous. Having this tool on hand can help you contain the problem and protect others from injury or property damage.

Remember to follow the manufacturer’s recommendations for fire extinguisher testing and replacement. Since you most likely won’t need it often, it is easy to overlook the maintenance of this safety tool.

  • Replace Old or Broken Electronics

Make sure that all electronic devices and appliances you use while camping are in good working condition. Many people take the same items year after year. They can become worn out or damaged while travelling. If anything isn’t working correctly or has visible damage, replace it. Your safety is worth investing in reliable equipment.

  • Use the Proper Cord to Plug In

Use the proper type of cord to plug in when you arrive at your campsite. It should be insulated and designed for this specific purpose. Using a lower quality extension cord or power strip can create a shock hazard.

  • Know the Supply to Avoid Tripping Out

Most campsites have a limited electricity supply available. 230V is common at commercial and Club locations. This is usually enough to power most appliances like the ones you use at home. However, know the restrictions so you don’t end up tripping out the system.

When this happens, the site manager will likely need to be contacted to reset the system. You will also cause problems for other campers who are also plugged into the electrical supply. Don’t become an unpopular camper and be mindful of your energy consumption while camping.

  • Avoid Moisture on Ground

Moisture is everywhere in nature. It can create a risky situation when using electricity in a tent. Make sure all electronics and cords are positioned above the ground in a safe spot. This is especially important for connection points.

  • Switch Power Off When You Leave

Switch the power off when you leave your campsite. It’s courteous and safer for the next travellers who set up camp there. Depending on what you are using, it may also be a good idea to switch off if you plan to be away from camp for the day.

  • Attach the Clip to Tent Frames

Setting up electricity in a tent is a little different from doing the same in a caravan. Most mobile mains will include a clip that can be attached to your tent frame. Make sure you use this to keep the power supply of the ground and secure.

Taking precautions now will help ensure that everyone has a pleasant camping adventure with on-site electricity!

Taking precautions now will help ensure that everyone has a pleasant camping adventure with on-site electricity!

Share:
Reading time: 5 min
General Informatiom, New Technologies, Renewables

How Solar Energy Helps Fight Pollution

April 9, 2020 by Robbie No Comments
Industrial pollution near houses

Most people know that solar energy is beneficial because it doesn’t consume non-renewable resources. That’s a big benefit, but it isn’t the only positive feature solar has to offer. It also helps stop pollution.

The Effects of Pollution on the Environment

Pollution can contaminate soil, air, and water. This has a dire effect on the ecosystem.

Air pollution leaves toxins on plants that are later consumed by wildlife. This can kill off essential populations of animals that are necessary to maintain the food chain. It can also increase the risk of health problems in wildlife due to contamination.

Litter like plastic and metal garbage doesn’t break down easily and can harm living things. In the ocean, discarded refuse is a serious hazard for marine animals. Pollution in the soil can kill plants or contaminate them, making anything that ingests them ill.

The Effects of Pollution on People

Pollution can also have a more personal impact when it comes to our health. Air pollution can cause respiratory illness and aggravated cardiovascular disease. It also places more stress on the heart and lungs, forcing them to work harder to supply oxygen to the body.

Short term exposure may cause discomfort but may not have a lasting effect. However, long-term exposure can cause permanent damage including accelerated aging of the lungs, loss of lung function and capacity, and the development of diseases like emphysema, bronchitis, asthma, and cancer. It can also lead to a shortened lifespan.

Water pollution can be just as dangerous. It allows water-borne diseases to spread like cholera, typhoid, malaria, jaundice, dysentery, and amoebiasis. Nitrates in water can restrict oxygen in the brain, which is especially risky for babies. Petrochemicals increase the risk of cancer, even at a low exposure rate.

Switching to Solar Stops Pollution

Solar energy is one of the most viable clean power sources we have. It can help reduce existing pollution problems and eliminate potential future concerns. How does solar stop pollution?

  • No Burning Means No Air Pollution – Fossil fuels like natural gas and coal require combustion and mining. These activities produce greenhouse gas emissions that make their way into the air. The gasses produced include methane and nitrous oxide, which vent into the environment. Solar energy doesn’t burn, so no greenhouse gases are produced.
  • Solar Keeps Waterways Clean – Solar doesn’t need water to generate power. That means there’s no need to tap into local waterways to keep your system running. Solar allows us to use electricity while keeping our rivers pristine.
  • Less Hazardous Waste Produced – Coal-fired plants also produce millions of tonnes of toxic waste that must go somewhere. This material ends up in landfills and abandoned mines where it is out of the way but is a hazard for the environment around it. Solar doesn’t produce hazardous waste.

Solar makes it possible to go green without giving up the luxuries of modern life. Connect Electric is here to help you learn more about what life is like with renewable energy. Contact us today to find out if a new solar system can meet your needs.

Share:
Reading time: 2 min
General Information, Home Electronics

How to Get More Use Out of Your Light Bulbs

April 3, 2020 by Robbie No Comments
A working lightbulb

Light bulbs are a common find in households, with most using many at a time. Replacements can get expensive, and constantly throwing away burned out bulbs generates more household waste. Connect Electric wants to share information on how to get more use out of your light bulbs so that you spend less and waste less.

  • Check Your Voltage

If the voltage is too high, it can cause light bulbs to burn brighter and need to be replaced sooner. Test electrical outlets to ensure that they are supplying the correct amount of energy. This can be done with a multimeter. If the reading is over 125 volts, then you may have a problem in your electrical system that requires a professional.

  • Keep Ceiling Fans Balanced

Fixture vibration can also cause light bulbs to burn out. This is usually a bigger problem in homes with ceiling fans. If the blades are not balanced, the fan may vibrate or shake when on. This can affect the lifespan of the filament in the bulb. Vibration can also occur in other situations, like light fixtures in garage door openers.

To correct the issue, minimise vibration as much as possible. You can also install heavy-duty filament bulbs that can survive better with vibration.

  • Screw Bulbs in Securely

Make sure all light bulbs are screwed into their sockets securely. They may come loose if the lamp or fixtures is bumped or shaken. If you recently moved, you may want to check the existing bulbs in case the previous owner didn’t screw them in as tightly as they should.

Bulbs are fragile, so do not apply too much pressure when installing. However, they should be firmly in place so that they don’t tilt or wobble.

  • Check Bulb Contact in Lamps

A small metal tab can be found inside the light bulb socket, right at the bottom. This is where the bulb connects to the power source, allowing it to light up. Sometimes, the tab can be pushed down too hard so that it doesn’t make full contact with the bulb. It may look like the bulb is burned out, but it may not be getting any power.

You can fix this problem by unplugging the lamp or turning off power to the fixture. Then, using a wooden popsicle stick, you can carefully bend the tab back into place. Replace the light bulb, turn the power back on and see if it works.

Old sockets may have a brittle tab that cannot be bent. This is a sign that it’s time to replace the lamp or fixture.

  • Make Sure the Wiring is Working

Bulbs may go out due to a wiring problem. Damaged wires may not work. You could also experience a short circuit if current flows outside of the wiring. When this happens, everything can go dark and a breaker may trip. Wiring problems can be complex, so you may need to seek the advice of an electrician.

  • Choose Efficient Light Bulbs

Choose efficient light bulbs to get more use out of them. LEDs are the best option. They cost more initially but can save you a lot of money in electricity use and replacement bulbs. Incandescent lights are the least efficient and are best replaced with something newer.

Contact Connect Electric if you notice problems with your wiring or light fixtures. We can help you find solutions that are safe and cost-effective.

Share:
Reading time: 2 min
Home Electronics

Electrical Safety Checklist for Homeowners

March 28, 2020 by Robbie No Comments
An Electrician Working

We often take our electricity for granted. We don’t think about it too much unless there is a problem. Homeowners need to be proactive when it comes to maintenance. By taking a few easy steps, you can avoid hazards and help prevent or stop ongoing problems.

Connect Electric wants to share this electrical safety checklist to help you protect your home and family.

  • Don’t Ignore Tripping Breakers – If you have breakers that trip often, this is a sign that something is wrong. Don’t ignore it. An electrician can inspect your wiring and breakers to determine the cause.
  • All Circuits Must Be Grounded – All circuits must be properly grounded to ensure safety. You can use a multimeter to verify grounding.
  • Only Use GFCI Outlets in Wet Areas – Any outlets that are in an area with a water source, like the kitchen or bathroom, must use a GFCI outlet. Newer homes should have these installed, however, older houses may not.
  • Unplug Appliances Before Cleaning – Unplug appliances before you clean them. This will allow you to reach all areas without risking electrical shock. This is especially important when using water or liquids to clean.
  • Cover Outlets in Homes with Children – Children may not realise the danger of electricity, so make sure you cover your outlets. This can be done with a separate outlet cover or by installing tamper-resistant outlets that have built-in shutters.
  • Replace Wobbly Hardware or Plugs – If you notice outlets or switches that seem wobbly or stick out of the wall, or if you have plugs that are loose in the outlet, replace them. This can cause connection issues or even become a fire or shock hazard if the prongs are partially exposed.
  • Be Mindful of Heat Sources – Keep all cables away from heat sources like space heaters or radiators. Do not arrange furniture on top of cords or run them under rugs. This type of setup increases the risk of electrical fire.
  • Know the Signs of Bad Wiring – Know the signs of bad wiring so you can deal with the problem before it becomes dangerous. Outlets may feel warm to the touch, may make a buzzing sound, lights may flicker, or you may smell a burning odour. Turn off power and contact an electrician if you notice any of these signs.
  • Use Proper Cables Outdoors – If you need power outdoors, make sure you use an extension cord rated for the job. Indoor cords are not as insulated as those made for outside use.
  • Unplug Devices When Not in Use – Unplug as many devices as you can when not in use. This reduces fire hazards and will cut back on the amount of wasted electricity in your home.

Know When to Hire an Electrician

One of the most important things to remember is when you should hire an electrician. Some jobs require professional knowledge to handle safely. If you have questions or notice problems with wiring, Connect Electric is here to help. Let us know what’s going on and we’ll help you find a solution.

Share:
Reading time: 2 min
Page 3 of 9« First...«2345»...Last »

About Us

Hello, we are Connect Electric Australia. We're here to give you tips and advice from professional electricians who have been in the industry for decades.

Recent Posts

  • Solar on the Water: Will Floating Solar Panels Cause Problems for Waterways?
  • The Hornsdale Big Battery Upgrade Receives Regulatory Approval
  • Sheep Join the Push for Solar Power in More Places
  • Experimental Electric Aeroplanes Are Taking to the Skies
  • Will New Solar Panels Increase My Home’s Property Value?

Recent Comments

    Categories

    • Commercial Electronics
    • Electric Cars
    • General Informatiom
    • General Information
    • Home Electronics
    • Industrial Electronics
    • Lighting
    • New Technologies
    • Renewables
    • Solar
    • Uncategorized
    • Wind

    Archives

    • July 2020
    • May 2020
    • April 2020
    • March 2020
    • February 2020
    • January 2020
    • December 2019
    • November 2019

    Instagram feed

    This error message is only visible to WordPress admins

    Error: API requests are being delayed. New posts will not be retrieved.

    There may be an issue with the Instagram access token that you are using. Your server might also be unable to connect to Instagram at this time.

    Error: API requests are being delayed for this account. New posts will not be retrieved.

    There may be an issue with the Instagram Access Token that you are using. Your server might also be unable to connect to Instagram at this time.

    Error: No posts found.

    Make sure this account has posts available on instagram.com.

    Tag cloud

    circuit breakers Electrican inspection Electrician tips home circuit breaker home electronics How to hire an electrician LED Lights LED vs Traditional Bulbs power board power usage Tripped circuit breaker

    Hello, we are Connect Electric. We're here to give you tips and advice from professional electricians who have been in the industry for decades.

    Recent Posts

    Solar on the Water: Will Floating Solar Panels Cause Problems for Waterways?

    Solar on the Water: Will Floating Solar Panels Cause Problems for Waterways?

    July 22, 2020
    The Hornsdale Big Battery Upgrade Receives Regulatory Approval

    The Hornsdale Big Battery Upgrade Receives Regulatory Approval

    July 15, 2020

    Categories

    • Commercial Electronics
    • Electric Cars
    • General Informatiom
    • General Information
    • Home Electronics
    • Industrial Electronics
    • Lighting
    • New Technologies
    • Renewables
    • Solar
    • Uncategorized
    • Wind
    This error message is only visible to WordPress admins

    Error: API requests are being delayed. New posts will not be retrieved.

    There may be an issue with the Instagram access token that you are using. Your server might also be unable to connect to Instagram at this time.

    Error: There is no connected account for the user 3035270156 Feed will not update.

    © 2020 Connect Electric Australia. All Rights Reserved